Skip to content
SkyArt Group
Book a site survey
Albert Genau guillotine glass: motor, remote settings and installation

Albert Genau guillotine glass: motor, remote settings and installation

16.11.2026 4 min read SkyArt Group

On Albert Genau guillotine glass the motor rarely fails and is replaced rather than repaired; remote pairing and limits are a service job; installation takes 2–3 hours. Field experience from an authorised manufacturing dealer.

Short answer

In Albert Genau guillotine glass systems the glass panels are connected to a motor by belt, chain or cable and operated by remote control. Motor failures are very rare; pairing the remote and setting the limits is done by the service team, not the user; installation takes 2–3 hours on average. SkyArt Group builds, installs and services these systems as an authorised Albert Genau manufacturing dealer. We are not an official Albert Genau representative; what follows is our field experience with the systems we install.

What does Albert Genau do, and what does the dealer do?

Albert Genau does not manufacture itself; it grants regional dealerships and supplies its profiles to dealers. The guillotine system is built by the authorised manufacturing dealer, who also connects the motor, pairs the remote, installs and services it. So for motor and remote questions your first contact is the dealer who installed the system.

Motor, remote and installation at a glance

TopicIn the systems we install
Motor failureVery rare. The motor is not repaired; it is replaced on site.
Power cutThe glass cannot be opened by hand (panels are tied to the motor); a UPS is recommended.
Remote batteryUsually a CR2032 coin cell, about 1 year; use a quality battery.
PairingEach remote is paired once; a spare cannot be pre-paired; if one breaks, service pairs the new one.
Remote / limit settingsNot user-adjustable; call service.
Installation2–3 hours on average.
Module sizeMax 4000 × 3000 mm for reliable operation; larger façades are split into modules.
Cable / chain lifeAt least 5, usually 6–7 years.
MaintenanceEvery 6 months.

If it does not work, what first?

  1. Check the fuse. The guillotine circuit may have tripped.
  2. Change the remote battery. A flat battery is the most common cause.
  3. Listen for noise. A motor or belt problem makes a sound; then call service.

Do not open or dismantle the system yourself; that voids the warranty. Full checklist: guillotine glass not working.

Safety

Bottom-up (vertically rising) guillotines have an anti-trap sensor for children and pets. Top-down models lower in a controlled way, so trapping does not occur. In businesses the most common complaint is the second pane catching on a table placed in front of the glass; keep objects clear of the glass.

How does installation go?

Measurements are taken at the site visit, the system is made to measure and on installation day most balconies are done in 2–3 hours. Step by step: how guillotine glass is installed; warranty and spare parts: Albert Genau warranty and service. We also use guillotine glass on winter garden sides. For guillotine glass, request a free site visit.

Frequently asked questions

How are the remote settings done?

Pairing and limit settings are not user-adjustable; the installing dealer's service does them.

Does the motor fail?

Very rarely. If it does, it is replaced on site, not repaired.

How long does installation take?

2–3 hours on average in the systems we install.

Can it be opened in a power cut?

No, not by hand; a UPS is recommended.

Let us measure your space.

The site survey and project design are free. We measure on site and present a tailored solution the same week.