A single zip screen is made up to 4500 mm wide × 3000 mm high. Wider façades are split into several screens, with split points set at the survey.
Short answer
A single zip screen is made up to 4500 mm wide × 3000 mm high. Wider façades are split into several screens; each has its own casing, side rails and motor. The split points and the number of screens needed are decided at the survey, looking at the position of columns and beams.
Size limits
| Dimension | Limit |
|---|---|
| Width of one screen | Up to 4500 mm |
| Height of one screen | Up to 3000 mm |
| Wider façade | Split into several screens |
| Wind resistance | Up to 120 km/h; cuts wind by about 70% |
How we plan a wide façade
- Split by column spacing: on a pergola or winter garden, screens are usually divided by the span between columns, so each is fixed to a solid surface.
- Mind the height: for openings over 3 metres, the screen height may be divided top and bottom; the solution is set at the survey.
- Measured on site: a zip screen is made to measure; width and height are taken at top, middle and bottom and the narrowest value is used. You may measure yourself if you are confident, otherwise SkyArt does it.
- Price: width, height, fabric, motor and remote decide the price; the final figure is given in writing after measuring.
What to watch on a large façade
In very strong storms we recommend retracting the screen. As width grows, so does the fabric area and wind load, so splitting large openings and fixing the side rails to solid surfaces matters. See how to measure a zip screen, installation steps and what decides the price.
For a restaurant, café or pergola façade, plan a zip screen together with a bioclimatic pergola if needed: book a free survey.



